File Upload for Quote

FOR PROJECT FILES GREATER THAN 30 MEGABYTES PLEASE COMPLETE THE FORM BELOW TO UPLOAD THEM TO OUR SECURE DROPBOX.

FOR PROJECT FILES LESS THAN 30 MEGABYTES PLEASE EMAIL THEM DIRECTLY TO RFQ@MIDWESTPROTO.COM

 

Please start by filling in the form below, providing as much information as you can, such as the quantity, the type of material, and any other important information you think we will need to know. Items marked with an * are required. Available processes and the materials available for each process are listed on the right side of the page.

If you are unsure which process should be used to build your parts, let us know the intended use so that we can help you select the appropriate process. If you have .jpgs, .bitmaps, or .pdfs that would help us understand your needs, please include them as well.

Once we've received your files, we'll contact you as soon as possible to discuss your project, and make sure we have everything we need to provide you with an accurate quote.

 

Please call us at 608-437-1400 with any questions or additional project details.

You can also reach us via our Contact Page.

 

https://www.midwestproto.com/sites/midwestproto.com/assets/images/default/MWP-QMS-Logo.jpg

Stereolithography (SLA)

Click here for available SLA materials

SLA Finish Levels

Level 1 -- Supports removed, sanded & light bead blast of support faces

Level 2 -- Supports removed, sanded & bead blast entire part

Level 2 + -- Sand to remove layer lines, sand with 180, bead blast entire part

Level 3 -- Sand to 320 removing all accessible layer lines so it's ready to prime/paint (show quality, urethane molds)

Level 4 -- Sand to 600 wet (high gloss finish or water clear; Required when parts are to be plated or to enhance transparency) 

 

Selective Laser Sintering (SLS)

Click here for available SLS materials

SLS Finish Levels

Level 1 -- Excess powder removed & lightly bead blasted

Level 2 -- Excess powder removed, lightly bead blasted, sealed to lessen porosity

Level 2+ -- Excess powder removed, lightly bead blasted, sealed to lessen porosity, lightly sanded to  a smooth-to-the-touch surface finish

Level 3 -- Excess powder removed, lightly bead blasted, sealed to lessen porosity, and sanded to a paint-ready finish

Dying -- various colors

Tumbling -- for a smooth finish

Smoothing -- injection molded-like surface finish

 

Continuous Liquid Interface Production (CLIP)

Click here for available CLIP materials

 

Multi Jet Fusion (MJF)

Available Material: HP PA 12

MJF Finish Levels

Smoothing -- injection molded-like surface finish

 

Fused Deposition Modeling (FDM)

Click here for available FDM materials

Various Finish Levels available upon special request 

 

Polymer-Jetting (PolyJet)

Click here for available Polyjet Materials

Various Finish Levels available upon special request

 

ZCorp Binder Jetting

Available Material: Visijet PXL

 

Paint Levels

For show quality models we recommend a Finish Level 3 for the following paint options: Primer, Paint, Soft Touch, Texture, & Dye.

We recommend a Finish Level 4 for the following paint options: Dye, Lens Quality Clear Coat, & Plating.

 

Contact Us

If you have a question, call or email us, to get the answer you need and keep your project moving forward.

Call: 608-437-1400

Email: rfq@midwestproto.com

via website: Contact Page